The water toner clock sensor MSW2 is faulty. If you have adjusted any of the following potential control-related modes, be sure to execute potential control by making the following selections: Using the Mode 1 Keep both sensors at the point farthest from the paper. Is the reading glass mounted correctly? Points to Note for Periodical Servicing Unless otherwise instructed, clean with lint-free paper and alcohol. Are there vertical lines in the image?

Uploader: Maran
Date Added: 8 March 2014
File Size: 15.52 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 71276
Price: Free* [*Free Regsitration Required]

Canon imageRUNNER 5000

The finisher accessories power supply PCB is faulty. It is for use at the factory only. Is the reading glass mounted correctly? F 3 Loosen the mounting screw, and move it in the direction indicated; then, fix it in place temporarily. After replacement of the charge wire, be sure to execute wire cleaning in service mode.

Mode of Detection The alignment plate does not leave home position when the alignment motor has been driven for 2 secs. AB series Not used.

  LT1421 MAC DRIVER

Canon imageRUNNER 5000 – multifunction printer (B/W)

Mode of Detection The stapler does not leave home position when the stapler motor has been driven for 0. Check the following readings in service mode: Laser Exposure System 6.

When your download is complete please use the instructions below to begin the installation of your download or locate your downloaded files on your computer. F F 3 Secure the end of the cable so far temporarily fixed to the hook of the reader frame using a spring.

Canon Authorized Dealers provide the highest quality service and are supported by Canon-certified technicians using Canon Genuine parts. Adjusting the image leading edge margin registration 3.

Canon IR / Toner Black | eBay

OFF default1: The stitch motor front, M7S is faulty. Caution For fine adjustment after storing the basic value, make the following selections: OFF no warning issued; default1: There is no firmware for the OS version you selected.

Generate a halftone image. Potential control system 3.

The water toner clock sensor MSW2 is faulty. Tablets by Dan Ackerman 8 days ago. See the Printer Manual: CK 20g Tool No. In the case of the iR Series V modelthe period of initial multiple rotation is reduced by 1 min. BBBB Indicates the date of occurrence. Or, mark the position for the solenoid by drawing a line on the support plate with a scriber.

  DX CR312 DRIVER

CL4 Drives the left ir000 pull-off roller.

Image including solid black imagerunnner check solid black density 3. Make the selections in service mode, and turn off and then on the main power switch: This page requires Javascript.

imageRUNNER – Support – Download drivers, software and manuals – Canon UK

Organization of Service Mode 1. Start Input value Range of input values. Do not use it in the field.